Specifications

102 GX Configurator-PN
(c) 2013 MITSUBISHI ELECTRIC CORPORATION
Name
Description
Choi-
ces /
Range
Default
Note: if an IO-Device is configured in DHCP
mode and a connection is established, the IO-
Controller compares the TCP/IP configuration
of the IO-Device with that contained in the con-
figuration of the IO-Controller. If they differ, the
connection cannot be established.
DHCP Based on
MAC address: the identifier used for obtaining
the IP configuration from the DHCP server will
be the MAC address of the IO-Device.
Station name: the identifier used for obtaining
the IP configuration from the DHCP server will
be the name of the IO-Device.
Client identifier: the identifier used for obtai-
ning the IP address from the DHCP server will
be the character string entered by the user in
the [Client Identifier] field.
Local: This parameter cannot be selected. It is
there for information only if the IO-Device is al-
ready set to local mode.
-
-
Client Identifier
The identifier used for obtaining the IP address
from the DHCP server
-
-
IP Address
IP address to be set in the device
-
-
Sub-Network Mask
Sub-network mask to be set in the device
-
-
Gateway IP Address
Gateway IP address to be set in the device
-
-
Permanent
Checked: the IO-Device is to store its new IP
configuration in non-volatile memory. When it is
next turned on, it must use its new IP configu-
ration.
Unchecked: the IO-Device is to store its new IP
configuration in volatile memory. When it is
next turned on, it must use its new IP configu-
ration.
-
-
Apply
Sends a DCP request to the IO-Device for it to
use its new TCP/IP configuration.
The result of this command will be displayed in
the Request status field.
For further information see 'Configure the IP Ad-
dress of an IO-Device'
-
-
Blinking Test
If the GSDML file of the selected device exists
in the device library and contains the
-
-