Specifications

2 - 12
2.3 Preparatory Procedures for Monitoring
2.3.7 Checking for normal monitoring
2 Perform an I/O check (for GT15, GT11)
Whether the PLC can communicate with the GOT or
not can be checked by the I/O check function.
If this check ends successfully, it means correct
communication interface settings and proper cable
connection.
Display the I/O check screen by [Main Menu]
[Debug & self check] [Self check] [I/O check].
For details on the I/O check, refer to the following
manual:
GT User's Manual
3 Communication monitoring function
(for GT10)
The communication monitoring is a function that checks
whether the PLC can communicate with the GOT.
If this check ends successfully, it means correct
communication interface settings and proper cable
connection.
Display the communication monitoring function screen
by [Main Menu] [Comm. Setting]
[Comm. Monitor].
For details on the communication monitoring function,
refer to the following manual:
GT10 User's Manual
(Operation of communication monitoring function
screen)
1 Touch [CPU] on the I/O check screen.
Touching [CPU] executes the communication check
with the connected PLC.
2 When the communication screen ends successfully,
the screen on the left is displayed.
Main Menu
Touch [Comm. Setting]
Touch [ ]
Communication settings
Touch [Comm. Monitor]