Specifications

1
OVERVIEW
2
CONNECTION TO α2
2.3 Preparatory Procedures for Monitoring
2.3.7 Checking for normal monitoring
2 - 11
(1) For GT15, GT11
(a) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's "Communication
setting" after downloading "Communication
Settings" of project data.
For details on the Utility, refer to the following
manual.
GT15 User's Manual, GT11 User's
Manual
(b) Precedence in communication settings
When settings are made by GT Designer 2 or
the Utility, the latest setting is effective.
(2) For GT10
(a) Communication interface setting by the Utility
Although the communication interface setting
can be checked, it cannot be changed.
For details on the Utility, refer to the following
manual.
GT10 User's Manual
(b) Communication settings
Communication settings can be changed on
only GT Designer2.
2.3.7 Checking for normal
monitoring
1 Check for errors occurring on the GOT
(for GT15, GT11)
Presetting the system alarm to project data allows you
to identify errors occurred on the GOT, PLC CPU, servo
amplifier and communications.
For details on the system alarm, refer to the following
manual.
GT User’s Manual
(When using GT15)
Advanced alarm popup display
With the advanced alarm popup
display function, alarms are displayed
as a popup display regardless of
whether an alarm display object is
placed on the screen or not (regardless
of the display screen).
Since comments can be flown from
right to left, even a long comment can
be displayed all.
For details of the advanced popup
display, refer to the following manual.
GT Designer2 Version Screen
Design Manual
Error code Communication Channel No.
Error message Time of occurrence
(Displayed only for errors)