Specifications

2.2 Connection Cable
2.2.1 RS-232 cable
2 - 5
1
OVERVIEW
2
CONNECTION TO α2
2 Connector specifications
(1) GOT side connector
Use the following as the RS-232 interface and RS-232 communication unit connector on the GOT.
For the GOT side of the RS-232 cable, use a connector or connector cover applicable to the GOT
connector.
*1 For the confirmation method of GT15 hardware version, refer to the following manual.
GT15 User's Manual
*2 The terminal block (MC1.5/9-ST-3.5 or corresponding product) of the cable side is packed together with the
GT10.
(2) α2 side connector
Use the connector compatible with the α2 side module.
For details, refer to the following manual.
α2 Simple Apprication Controller
HARDWARE MANUAL
3 Precautions when preparing a cable
The length of the RS-232 cable must be 16.5m or less.
GOT
Hardware
version*1
Connector
type
Model Manufacturer
GT1595-X -
9-pin D-sub
(male) inch
screw fixed type
17LE-23090-27(D4CK) DDK Ltd
GT1585V-S -
GT1585-STBA
B GM-C9RMDU11 Honda Tsushin Kogyo Co., Ltd
C
17LE-23090-27(D4CK) DDK LtdGT1585-STBD -
GT1575V-S -
GT1575-STBA
B GM-C9RMDU11 Honda Tsushin Kogyo Co., Ltd.
C
17LE-23090-27(D4CK) DDK Ltd
GT1575-STBD -
GT1575-VTBA
D GM-C9RMDU11 Honda Tsushin Kogyo Co., Ltd.
E
17LE-23090-27(D4CK)
DDK Ltd
GT1575-VTBD -
GT1575-VN -
GT1572-VN -
GT1565-V -
GT1562-VN -
GT155
-
GT1155-Q,
GT1150-Q
- 17LE-23090-27(D3CC)
GT10 -
9-pin terminal
block
*2
MC1.5/9-G-3.5BK PHOENIX CONTACT Inc.
GT15-RS2-9P -
9-pin D-sub
(male) inch
screw fixed typ
17LE-23090-27(D4CK) DDK Ltd