Specifications

2 - 1
2
1
OVERVIEW
2
CONNECTION TO α2
2. CONNECTION TO a2
CONNECTION TO
α2
2.1 System Configuration . . . . . . . . . . page 2-2
This section describes the equipment and cables needed
when connecting a GOT to an α2.
Select a system suitable for your application.
2.2 Connection Cable . . . . . . . . . . . . . page 2-4
This section describes the specifications of the cables needed
when connecting to an α2.
Check the specifications of the connection cables.
2.3 Preparatory Procedures for Monitoring
. . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-6
This section provides the procedures to be followed before
performing monitoring in connection to an α2.
This procedures are written on the step-by-step basis so that
even a novice GOT user can follow them to start
communications.
2.4 PLC Side Setting . . . . . . . . . . . . . page 2-14
The PLC side settings for GOT connection are explained.
When checking the PLC side settings, refer to this section.
Check the specifications of the connection cables.
2.5 Device Range Available for GOT1000
Series . . . . . . . . . . . . . . . . . . . . . page 2-15
This section describes the device range of α2 that can be
used for GOT.
2.6 List of Functions Added by Version Upgrade
. . . . . . . . . . . . . . . . . . . . . . . . . . page 2-16
This section describes the functions added by version upgrade
of GT Designer2 or OS.