Specifications
2
Text taken from the FX analog control manual
• This manual provides information for the use of the FX3 Series Programmable Controllers. The
manual has been written to be used by trained and competent personnel. The denition of such a
person or persons is as follows;
(1) Any engineer who is responsible for the planning, design and construction of automatic
equipment using the product associated with this manual should be of a competent nature,
trained and qualied to the local and national standards required to fulll that role. These
engineers should be fully aware of all aspects of safety with regards to automated equipment.
(2) Any commissioning or service engineer must be of a competent nature, trained and qualied
to the local and national standards required to fulll that job. These engineers should also be
trained in the use and maintenance of the completed product. This includes being completely
familiar with all associated documentation for the said product. All maintenance should be
carried out in accordance with established safety practices.
(3) All operators of the completed equipment should be trained to use that product in a safe and
coordinated manner in compliance to established safety practices. The operators should also
be familiar with documentation which is connected with the actual operation of the completed
equipment.
Note: The term ‘completed equipment’ refers to a third party constructed device which contains or
uses the product associated with this manual
• This product has been manufactured as a general-purpose part for general industries, and has not
been designed or manufactured to be incorporated in a device or system used in purposes related to
human life.
• Before using the product for special purposes such as nuclear power, electric power, aerospace,
medicine or passenger movement vehicles, consult with Mitsubishi Electric.
• This product has been manufactured under strict quality control. However when installing the
product where major accidents or losses could occur if the product fails, install appropriate backup
or failsafe functions in the system.
• When combining this product with other products, please conrm the standard and the code, or
regulations with which the user should follow. Moreover, please conrm the compatibility of this
product to the system, machine, and apparatus with which a user is using.
• If in doubt at any stage during the installation of the product, always consult a professional electrical
engineer who is qualied and trained to the local and national standards. If in doubt about the
operation or use, please consult the nearest Mitsubishi Electric distributor.
• Since the examples indicated by this manual, technical bulletin, catalog, etc. are used as a reference,
please use it after conrming the function and safety of the equipment and system. Mitsubishi
Electric will accept no responsibility for actual use of the product based on these illustrative
examples.
• This manual content, specication etc. may be changed without a notice for improvement.
• The information in this manual has been carefully checked and is believed to be accurate; however,
if you have noticed a doubtful point, a doubtful error, etc., please contact the nearest Mitsubishi
Electric distributor.
Trademarks
• Microsoft
®
and Windows
®
are trademarks of Microsoft Corporation of the United States registered
in the United States and other nations.
• Other company names and product names are registered trademarks of the individual companies.