Specifications

1. Program changeover method

z Reading source program from saved project data

(1) Locate the saved data for the source program.

(2) Start GX Works2.

(3) Select and open out the source project.

• When the project is saved as a GX Works2 type le

Select “Project” -> “Open project” from the menu, and select the conversion source le.

• When the project is saved as a GX Developer type le

Select “Project” -> “Open other data” -> “Open other project” from the menu, and select the

conversion source le.

(4) Conrm the reading result of the sequence program on the program display screen.