Specifications

6
Split System Inverter Air Conditioners 2014
Functions.
Detachable
Detachable Indoor Air Inlet Panel
The air inlet panel on the indoor unit opens and closes easily making filter cleaning simple. The
suction panel can be easily removed.
Auto
3D Auto
You can choose the best heating or cooling pattern with the touch of a button.
Auto Flap
Auto Flap Mode
The unit automatically selects the optimal
angle whatever the operation mode.
Air Scroll
Air Scroll
The swing of the flap causes the air flow to
spiral and the breeze to reach all corners
of the room.
When removing the air inlet panel for internal
cleaning or other reasons, open the grill by 65
degrees and then pull it to the side.
Filter
Comfortable Functions
Comfortable Air Flow Functions
Convenience & Economy Functions
Maintenance & Prevention Functions
Others
Allergen
Filter
Allergen
Filter
Allergen
Filter
Allergen Clear Filter
The filter breaks down the pollen, lice, and all allergens that live on cat skins, etc. and
deactivates them.
SUN
Filter
SUN
Filter
SUN
Filter
Photocatalytic Washable Deodorizing Filter
It keeps air fresh by deodorizing the molecules causing odor. The deodorizing ability can be
easily restored simply by cleaning and exposing the filter to the sunlight.
Fuzzy Auto Mode
Automatically the unit determines its operating mode and temperature setting based on a fuzzy
calculation and adjusts the inverter frequency.
Automatic Operation
The air conditioner automatically selects from heating, cooling or dry operation.
Memory
Memory Flap
While the flap is swinging it can be stopped at any angle. The flap returns to this position next
time the unit starts.
UP/DOWN
Up/Down Flap Swing
The Up/Down flap can be adjusted to the
preferred angle anywhere between horizontal
and perpendicular.
Lateral
Swing
Lateral Swing
The louver swings from right to left automatically. Louver angle can be fixed in any desired
position.
Air outlet
selection
Air Outler Selection
Both lower and upper air outlets and upper air outlet can be selected. (SRF models only)
Positioning
of
installation
Positioning of Installation
You can set the left-right air flow directions when you install the air conditioner near the side
wall by remote controller operation.
Enzyme
Filter
Enzyme
Filter
Enzyme
Filter
Natural Enzyme Filter
Enzymes used in the filter are naturally occurring lytic enzymes which attack cell walls of
microorganisms trapped on the filter and destroy them.
Allergen
System
Allergen
System
Allergen
System
Self Clean
Operation
Self Clean
Operation
Self Clean
Operation
Allergen System
Suppresses the influence of the allegen caught by the filter.
Self Clean
The indoor fan continues to operate on ultra low speed to dry the unit.
“HI POWER” Operation
TThe unit can operate continuously in HI POWER mode for 15 minutes. This mode is used to
reach the desired temperature quickly.
3 HOT
S
t
a
r
t
K
e
e
p
S
p
u
r
t
Three “Hot” System
‘Hot start’ enables the unit to begin heating operation quickly. ‘Hot spurt’ is a fast heating
system that works to increase the temperature setting by two degrees. ‘Hot keep’ is used during
the automatic defrost cycle to prevent cool air being circulated. These three operational control
systems help ensure comfortable and efficient heating.
On Timer
On Timer
This enables the operation to start a little earlier so that
the room is near to the set temperature at ON time.
OFF Timer
Off Timer
The unit stops at the specified time.
Weekly Timer
Up to 4 programs with timer operation (ON-TIMER/
OFF-TIMER) are available for each day of the week. MAX
28 programs per week can be set.
24h Timer
24-hour On/Off Programmable Timer
By combining a start timer with a stop timer you can
register two timer operations a day. Once set timers will
start or stop the system at the specified time of the day
repeatedly.
DRY
Dry Operation
The unit dehumidifies the room by intermittent cooling
operation.
Silent Operation
The sound level of outdoor units is at least 3dB(A) lower
than the nominal level.
Economy
Economy Mode
The unit achieves effective energy saving operation while
still keeping a comfortable cooling or heating operation.
Sleep
Sleep Mode
The room temperature is automatically controlled during
the set sleep mode period ensuring that the room
temperature will not get too hot or cold.
Night Setback
During cold seasons, room temperatures can be
maintained at a comfortable level even while the room is
unattended. The air conditioner keeps the temperature
at 10°C.
MC
Microcomputer-Operated Defrosting
This function automatically eliminates frost and helps minimize excessive operation in other
modes.
Diagnostic
Self
Self-Diagnostic Function
If the air conditioner malfunctions an internal microcomputer runs a self diagnosis. Inspection
and repair should be performed by authorized dealers.
Back-up
Switch
Back-up Switch
On the indoor unit there is a back up on/off switch. The system will operate in the previous
mode.
Restart
Auto
Auto Restart Function
Power blackout auto restart function records the operational status of the air conditioner
immediately prior to being switched off by a power supply interruption. The unit automatically
resumes operations in the mode and temperature set point after the power has been restored.
24h ION
24-hour ION
The air conditioner body has a tourmaline coated sheet. Negative ions (2,500 -3,000/cc) are
generated when the air conditioner is not running, allowing you to experience them without
incurring any electrical cost.
Luminous
Luminous Button
With wireless “Luminous” remote controls that even “glow in the dark”, it is possible to operate
all desired functions of the unit with the click of a button.
SWING FLAP
Flap moves up and down
continuously.
Thick line : moves quickly
Thin line
: moves slowly
COOLING & DRY
Horizontal blowing
COOLING & DRY
HEATING
Thick line : moves quickly
Thin line
: moves slowly
Slant forward
blowing
HEATING