Technical data

24
Hig h P erfo r m ance A ir C o nd itio n in g
Outdoor Unit Dimensions
FDC71VN (unit:mm)
SRC40ZIX-S, 50ZIX-S, 60ZIX-S (unit:mm)
Mark
A
B
D
E
Item
Refrigerant gas side pipe connection tap
Refrigerant liquid side pipe connection tap
Drain discharge port
Anchor bolt hole
ø12.7(flare)
ø6.35(flare)
ø
20.5x5places
M10x4places
OUTDOOR UNIT DIMENSIONS
Notes:
(1) It must not be surrounded by walls on the four sides.
(2) The unit must be fixed with anchor bolts.An anchor bolt must not protrude more than
15mm.
(3) Where the unit is subject to strong winds, lay it in such a direction that the blower outlet
faces perpendicularly to the dominant wind direction.
(4) Leave a 1m or larger space above the unit.
(5) A wall in front of the blower outlet must not exceed the units height.
(6) The unit name plate is attached on the lower right corner of the front panel.
280
Open
80
250
280
75
80
Open
Open
100
100
250
321
L1
L2
L3
L4
Dimensions
Examples of
installation
Mark
A
B
C
D
E
F
Item
Refrigerant gas side pipe
connection tap
Refrigerant liquid side pipe
connection tap
Pipe/cable draw-out port
Drain discharge port
Anchor bolt hole
Cable draw-out port
ø15.88(flare)
ø9.52(flare)
ø
20.3x3places
M10x4places
ø
30.3x3places
Notes:
(1) It must not be surrounded by walls on the four sides.
(2) The unit must be fixed with anchor bolts.An anchor
bolt must not protrude more than 15mm.
(3) Where the unit is subject to strong winds, lay it in such
a direction that the blower outlet faces perpendicularly
to the dominant wind direction.
(4) Leave a 1m or larger space above the unit.
(5) A wall in front of the blower outlet must not exceed the
units height.
(6) The unit name plate is attached on the lower right
corner of the front panel.
500
Open
100
250
Open
250
150
250
Open
300
100
250
321
L1
L2
L3
L4
Dimensions
Examples of
installation
222
40
20
40
20
340
380
310
47
40
55
580
150
150
30
30
48.5103.3
750
24.1
D
2-ø15
25.8
29.8
87.9880
150580150
61
532
223
60
15
340
61 47.5
19 380 19
418
165.5 25.5
Terminal block
E
D
B
A
Minimum installation space
Intake
outlet
Intake
Service
space
L1
L2
L3
L4
327.3
43.5
290
83.5
24.3312.514.8
351.6
327.3
89 510
800
201
17.9
71.2
E
D
50.6
12
640
12.4
93 42.5
148.4 33.5
40°
40°
Check joint
Terminal block
B
A
L2
L3
outlet
L1
L4
Intake
Service
space
Intake