Technical data

19
High Efficiency
■ Cool Only Wall-split System - Non Inverter
Control System (Individual Control)
Wired remote control with weekly timer (option)
RC-E3 stores operation data when an anomaly occurs and indicates the error
on the LCD. It also displays cumulative operation hours of the air conditioner
and compressor since commissioning.
Run hour meters to facilitate maintenance checking
RC-E3 provides (as a standard feature) a weekly timer, which allows
one-week operation schedules to be registered. A user can specify up to
four times a day to start/stop the air conditioner. (Temperature setting is
also possible with the timer).
Weekly timer function as standard
Room temperature controlled
by the remote control sensor
SRC40ZHX-S
SRC50ZHX-S
SRC60ZHX-S
FDC100VN
FDC125VN
FDC140VN
FDC71VN
Control Systems [Individual control]
OUTDOOR UNIT (4.0-14.0kW)
Installation workability
Enhanced installation workability thanks to the extended pipe length – one of the longest
levels in the industry and pre-charged refrigerant.
Piping length can be extended up to 50m for
single type, which allows wider design flexibility.
Refrigerant pre-charged piping length extends up to 30m. (
4.0 ~ 6.0kW: up to15m)
This eliminates the need to add refrigerant on site, which sets it free from trouble of excessive or insufficient charging of refrigerant, and allows
carrying out the installation smoothly.
Height difference
(Outdoor>indoor)
Piping length
7.1~14.0kW
30m
4.0 ~ 6.0kW :
30m
7.1~14.0kW :
50m
4.0 ~ 6.0kW
20m
Point
1
Piping length – 50m
Point
2
Refrigerant pre-charged piping length extending to 30m
RC-E3
The RC-E3 controller
enables extensive access to
service and maintenance
technical data combined
with easy to use functions
and a clear LCD display.
Remote Control line up
indoor unit remote control
wired all models
RCH-E3
RC-E3
indoor unit remote control
wireless
RCN-TC-24W-ER
RCN-T-36W-E
FDTC
FDT
RCN-KIT3-EFDUM, FDU
RCN-E1RFDEN
The temperature sensor is housed in the top
section of the remote control unit. This
arrangement has improved the sensitivity of the
remote control unit’s sensor, which permits more
finely controlled air conditioning.
Changeable range
Upper limit 20~30°C(effective for heating operation)
Lower limit 18~26°C(effective for non-heating operation)
RC-E3 allows the upper and lower limits of a set temperature range to be
specified separately.
By adjusting a set temperature range, you can ensure energy saving air
conditioning by avoiding excessive cooling or heating.
Changeable set temperature ranges
Timer operation
Simple remote control (option)
It can control up to 16 units individually by pressing the AIR CON No. button.
Up to 16 units
This function allows starting the air conditioner automatically when power
supply is restored after power failure or by turning on the power switch.
AUTO restart
RCH-E3 (wired)
Considering specialized usage in hotel
rooms, control buttons are limited only to
minimum required functions such as ON/OFF,
mode, temperature setting and fan speed. It
is really simple and easy to use.
NEW
RCN-T-36W-E,
RCN-TC-24W-ER
RCN-KIT3-E RCN-E1R
For wireless control simply insert the infrared receiver kit on a corner of the panel.
SC-THB-E3
In case the sensor in the indoor units or the remote
control sensor can not sense the room temperature
correctly, or individual remote control in each room is
not required but only a censor is required (as when
center control system is in place), install SC-THB-E3
at a proper place in the room.
Wireless remote control (option) Thermistor (option)