Specifications

SC-WGWNA-A, SC-WGWNA-B Configuration Manual
Document No. ISTZ10006 March 1, 2010
8
6.3.1 Air-con Cell Number
C00∼C95. There will be no problem even if the numbers are not consecutive. For indoor units
in a group, assign the same cell number. There is no need to describe the line of the cell number
of an unconnected indoor unit. Delete the line of the cell number that is not connected.
6.3.2 SL System Number
S1∼S2
6.3.3 SL Address
U00∼U63
U00∼U47 when using Prev. SL
6.3.4 Accounting Type (SC-WGWNA-B only)
Choose from the following the accounting method for the indoor unit.
Type Accounting Method
MULTI1 Accounting according to the amount of refrigerant flow.
Applicable to KX and LX Series
MULTI2 Accounting according to the thermo ON/OFF.
Applicable to KX and LX Series
RUN/STOP Accounting according to the unit operating time.
Applicable to Multi-indoor unit PAC，Single PAC and PAC for
equipments (with I/F).
6.3.5 Capacity (SC-WGWNA-B only)
Choose the nominal capacity (Cooling capacity) of the indoor unit.
6.3.6 Air-con Cell Name
Cell name for the cell number must be within 8 full size or 16 half-size characters.
6.3.7 Description
A description more detailed than the cell name can be assigned to a cell number. The length of
the character string can be up to 64 characters. Leave it blank in case it is not necessary.