Specifications

210

1) Use an attached pattern sheet and mark the position of screws to attach the mounting plate.

2) Determine the direction to lead the pipe and bore a through hole on the wall aligning with the pipe hole of unit.

3) Remove screws (2 pcs.) and remove the right and

left panels from the Indoor unit. ( Remove screws

first, move slightl to remove.)

4) Remove the lower panel from the Indoor unit. It

can be remove if 3 screws are loosened but not

removed.

5) Secure the mounting plate with screws at a selected

place on the wall. When the wall is made of con-

crete, use the marketed anchor bolts (M6)

WallWall

OutdoorIndoor

ø 70 mm

Sleeve

Cut the sleeve for the thickness

of wall and insert in the hole.

Sealing

plate

Front