Specifications

928
OPTION
OPTION
(g) Temporary fixing of air inlet grille before receiving power supply
Because of motor drive, the air inlet grille cannot be enclosed before receiving
the power source.
1) If you need to enclose the grille before receiving the power source, you
can fix it provisionally with the attached stopper.
2) Hold up the air inlet grille and, avoiding wires being bent or pinched, enclose
in the panel.
3) Insert the attached stopper in the hold through the grille and hook it on the
catch.
Note (1) Refrain from lifting with the stopper attached. Otherwise, the grille
lifting device may be damaged.
stopper
(h) Installation of wireless remote controller (Remote controller holder)
Use the remote controller holder, which is attached to the indoor unit.
Request Avoid following positions.
● Place where exposed to direct sunlight.
● Vicinity of heat radiating device.
● Place where highly humid or splashed with water.
● Irregular mounting surface.
Cautions for installation of holder
● Adjust the holder in the vertical posture.
● Screw heads must be flash with the surface.
● Do not install on a mud wall, or others.
Note (1) Wireless remote controller attached to the indoor unit is capable of
ordinary operations but cannot move the grille up and down.
Countersunk
head screw
Remote controller
holder