Specifications

917
OPTION
OPTION
(5) Control Switch
The following controls may be changed by the control switch.
The switch is OFF is pushed to the left, and ON if pushed to the right.
There are 4 switches, but do not change the 3rd and 4th switches (fixed at OFF).
Change the control before turning the power on.
1
ON Combining with SLA-2A-E, and conduct group control
OFF Simultaneous control for all indoor units within network upon shipment
ON When electricity is restored after blackout, transmit a
2
command to stop operations
OFF When electricity is restored after blackout, does not upon shipment
transmit a command to stop operations
Notes (1) When execiting the control of each group, 1 unit of SLA-2A-E must be used.
(2) Perform group setting with SLA-2A-E.
(3) When the control switch 1 is in the OFF position, the indoor unit in the network will operate with the timer regardless of
the operation of the central remote control. When the switch is in the ON position, the timer unit is set with SLA-2A-E,
and only the center or the indoor unit of the central remote control will operate with the timer.
(4) By pressing [Setting] and [Setting Mode] simultaneously, the present time, timer setting and hoilday setting can be cleared.
From the top in
order, 1, 2, 3, 4.