Specifications

914
OPTION
OPTION
(4) Control Switch
The following controls can be changed by changing the setting of switch SW32 on the printed circuit board. Change the control
on-site as necessary.
Switch No. Setting Control function
1
ON (upon shipment) Filter sign vaild
OFF Filter sign invalid
SW32 2
ON (upon shipment) With blackout compensation
OFF No blackout compensation (❈1)
3
ON (upon shipment) Normal (❈2)
OFF
SW32 (up-ON, down-OFF)
(❈1) Even in the case of “no blackout compensation”, group setting is maintained. In
the case “with blackout compensation”, the unit in operation before the blackout
will be operated after the blackout.
(❈2) Leave 3 of SW32 at the ON position.