Specifications

1056
FDC-HKXR
2) Connection to lower direction.
a) Cut off the accessory intake gas side connection pipe and then connect to the intake gas side atraight pipe.
b) Remove the back hall blank, pass through the hole the intake gas side, discharge gas side, and liquid pipes, and then
connect them to the operation valve and the on-site piping. (Because the liquid side pipe is on-site piping, bend it to the
dimensions shown in the illustration at left.)
6562
Intake gas side
(Accessory)
Intake gas side
connection pipe
(Accessory)
Gas side
connection pipe
(Accessory)
Liquid pipe
(On-site piping)
Back
Half-brank
80
10540
107 100
6570
25075
60 43
100
85
(c) How to connect piping
1) Connection to front directions.
a) Remove the front hall blank, pass through he hole the intake gas side, gas side and liquid pipes. and then connect then
to the service valves and the on-site piping. (Because the liquid side pipe is on-site piping, bend it to the dimensions
shown in the illustration at low.)
62
65
80
85
70
100
250
75
103
97
88 80
145
187