Specifications
9
100m long piping applicable for a large-scale
building
At the height difference of 50m (*) between indoor unit and
outdoor unit, the total length is 100m. The level difference
between indoor units can be set to 15m between the indoor
units. (The pipe length beyond the first branch is changed from
existing 30m to 40m. Please contact sales office for details.)
* 40m in the following case of the outdoor unit.
By the use of 4-way piping exit option for the
outdoor unit, a flexible layout can be set.
A4-way piping exit ports from the outdoor unit has been
prepared allowing the outdoor unit installation position to be
decided according to the installation condition. The piping exit
position can be selected from front, back right, or bottom.
It is as compact as it can be carried with the
elevator.
On the multi KX combination series which achieves the large
capacity by installing plural outdoor units of 10 horsepowers,
the installation dimension can be calculated from two kinds of
modules. One module is so compact a design of the top class in
the industry that it can be carried with the elevator.
Workability
Outdoor unit
* 40m in the following case of the outdoor unit
Indoor unit
Between
indoor units
level difference
between
indoor units 15m
Level difference
50m, total
length 100m.
1,350
1,450
600
900
1,500
1,350
Ordinary elevator New model
Basic unit specification of KX2 (large-capacity combination)
Inverter Multi
Branch pipe set to combine the separately available outdoor unit
Model Model
Cooling capacity
Heating capacity
Electric power for cooling
Electric power for heating
Cooling operation current
Heating operation current
Starting current
Coefficient of electric
power for cooling
Coefficient of electric
power for heating
Inverter unit
Constant-speed unit
10HP 20HP
Total capacity of outdoor units
Part No.
30HP
3phase 380v 50HZ
Power supply
Cooling capacity
Heating capacity
Capacity
Outline dimensions
Height X Width X Depth
Weight
Compressor motor
output X Number of units
Blower motor
output X Number of units
Blow rate
Operating sound
Liquid pipe
Connection
piping
Gas pipe
Tolerable length of refrigerant piping
Remote addressing with new controller.
If the remote controller and indoor unit are connected one-on-
one, the address can be decided from the remote controller
without setting switches on the indoor PCB.
Demand control of high energy saving
effect
Whether the demand is valid or invalid can be set at each sub
unit. On the 30-hosepower type, it is selectable at three steps of
0%, 33% and 66%.
: http://splitoff.ru/tehn-doc.html