User`s manual

Press the timer switch.
The display changes with the following sequence:
Set to [Time indication]
Press the time setting switch.
The “hour” area is flickering.
Press the
or to set “hour”.
●
The timer is set based on the present time. Adjust the present time correctly at first.
PRESENT TIME SETTING PROCEDURE
Press the setting switch.
The [Morning] indication flickers.
●
In the case that the present time is in the morning, press
the setting switch again.
●
In the case that the present time is in the afternoon, press
the time setting switch to change the indication of morning
to afternoon, then press the setting switch again.
CHECK
FAN
SPEED
AUTO
SWING
TIMER
SET
MODE
TEMP
TIME
AM
SE T TEMP
O
C
HI
FAN
O
C
REMOTE
COOL
FILTER
RESET
I
2,4,6
1 3,5
No indication Time indication Timer ON
Program timer Timer OFF
Press the setting switch.
The [hour] setting of present time has been finished.
Press the time setting switch.
The “minute” area is flickering.
Press the
or to set “minute”.
Press the setting switch.
The flickering of present time changes to continuous lighting
to indicate completion of setting.
1
2
3
4
5
6
5
Press the “timer” switch.
Set to “PROGRAM”.
Set “OFF” of the timer.
Set the timer in the order of 1 and 2 shown in above “ON/
OFF TIMER SETTING”.
Set “ON” of the timer.
Set the timer in the order of 1 and 2 shown in above “ON/
OFF TIMER SETTING”.
Press the timer switch.
The display changes with the following sequence:
Set to [OFF] or [ON].
Set the timer time.
Set the desired operation stop or start time using the same
procedure as in steps 2~6 of the “PRESENT TIME SETTING
PROCEDURE.”
■ “OFF” timer: stops operating the air conditioner when a set time has elapsed.
“ON” timer: starts operating the air conditioner when a set time has elapsed.
1
2
●
The operation is stopped or started at the setting time and the indication
on the timer changes to “No indication”.
Time change
Reset the desired time using the time setting switch and the setting
switch.
The time that has been set before becomes invalid and the timer opera-
tion is restarted with the reset time as the starting point.
Release
When it is desired to change to the normal operation during the
operation of timer, press the timer switch to indicate no-indication
or time indication.
The timer becomes invalid and the mode changes to the normal operation.
CHECK
FAN
SPEED
AUTO
SWING
TIMER
SET
MODE
TEMP
TIME
TIMER
OFF
PM
SE T TEMP
°C
FAN
HI
°C
REMOTE
COOL
FILTER
RESET
I
1
No indication Time indication Timer ON
Program timer Timer OFF
The air conditioner
turns on or off when a
set time has elapsed.
ON / OFF TIMER SETTING PROCEDURE
3
●
The program timer operation starts.
1
2
●
The program timer operates the shorter set time first.
●
If “ON” and “OFF” are set at the same time, the “OFF” timer will
operate at the set time everyday.
This will work as a prevention when it is forgotten to turn off.
Timer operation indication
●
Timer indication
The set timer mode “PROGRAM” and the timer mode “OFF” or “ON” that
operates next will be displayed.
■ Timer operation of two actions on a day is possible by combination of OFF timer and ON timer of PROGRAM timer.
Once after the PROGRAM timer is set, the air conditioner will be started and stopped at the same time everyday.
PROGRAM TIMER SETTING PROCEDURE
The program timer
starts and stops the
air conditioner at the
same time everyday.
CHECK
FAN
SPEED
AUTO
SWING
TIMER
SET
MODE
TEMP
TIME
PROGRAMTIMER
OFF
PM
SE T TEMP
O
C
HI
FAN
O
C
REMOTE
COOL
FILTER
RESET
I
3
●
The unit can be turned on or off by ON/OFF switch even if the timer is used.
●
When the control changes to [Center] by setting of the option control-
ler, the operation by timer becomes invalid.
NOTE
NOTE
●
Change of setting time and how to release the setting.
Refer to the above item ON/OFF TIMER SETTING PROCEDURE.