User`s manual

ManualsBrandsMitsubishi ManualsDomestic AppliancesFDCJ280HKXE2B

AIR-CONDITIONING & REFRIGERATION SYSTEMS HEADQUARTERS

3-1, Asahimachi, Nishibiwajima-cho, Nishikasugai-gun, Aichi-pref., 452-8561, Japan

Fax: (052) 509-2039

MITSUBISHI HEAVY INDUSTRIES EUROPE, LTD.

Willem-Barentzstraat 27 Unit a 3165 aa, Rotterdam, The Netherlands

Phone: 31(0)10 428 4284

Fax: 31(0)10 428 4285

USER’S MANUAL

MITSUBISHI DAIYA PACKAGED AIR CONDITIONER

FDT SERIES

FDT208

FDT258

FDT308

FDT408

FDT508

FDR SERIES

FDR208

FDR258

FDR308

FDR408

FDR508

FDU SERIES

FDU308

FDU408

FDU508

FDU808

FDU1008

PSA012B621

FDUM SERIES

FDUM308

FDUM408

FDUM508

FDFL SERIES

FDFL258

FDFL308

This air conditioner complies with EMC Directive 89/336/EEC,

LV Directive 73/23/EEC.

CE marking is applicable to the area of 50 Hz power supply.

Above models are effective for 220-240 V, 50 Hz and 220 V, 60

Hz power supply.

Summary of content (10 pages)

PAGE 1
USER’S MANUAL MITSUBISHI DAIYA PACKAGED AIR CONDITIONER FDT SERIES FDT208 FDT258 FDT308 FDT408 FDT508 FDR SERIES FDR208 FDR258 FDR308 FDR408 FDR508 FDU SERIES FDU308 FDU408 FDU508 FDU808 FDU1008 FDUM SERIES FDUM308 FDUM408 FDUM508 FDFL SERIES FDFL258 FDFL308 AIR-CONDITIONING & REFRIGERATION SYSTEMS HEADQUARTERS 3-1, Asahimachi, Nishibiwajima-cho, Nishikasugai-gun, Aichi-pref., 452-8561, Japan Fax: (052) 509-2039 MITSUBISHI HEAVY INDUSTRIES EUROPE, LTD.
PAGE 2
Thank you for purchasing a Mitsubishi Daiya Air Conditioner. To ensure satisfactory operation for many years to come, this Owner’s Manual should be read carefully before using your air conditioner. After reading, store it in a safe place. Please refer to the manual for questions on use or in the event that any irregularities occur. This instruction manual contains the explanation of the heat pump air-conditioner.
PAGE 3
SAFETY PRECAUTIONS SAFETY PRECAUTIONS ❚ OPERATION PRECAUTIONS CAUTION DANGER Do not expose yourself to the cooling air for prolonged periods. Do not insert anything into the air inlet. This could affect your physical condition and cause health problems. This may cause injury, as the internal fan rotates at high speed. While the fan of the outdoor unit is on operation, do not put your fingers or sticks into the unit. Even if it is not running, the unit could start running suddenly.
PAGE 4
FDFL Series STRUCTURE AND COMPONENTS Discharge grill Indoor unit Remote control FDT Series Louver Swing flap ● Cool or warm air is blown through the flap. ● Wind direction is adjusted with the flap. Louver knob Knob to change blowout air direction. (Provided at two places of right and left under the cover.) Suction grille Suction grille Inhales air in the room. Remote control Controls the operation of air conditioner. Air filter Removes dust or dirt from inhaled air. (Provided in suction panel.
PAGE 5
CONTROLS AND FUNCTION The illustration below shows the status that the cover is open. The liquid crystal display area indicates the full contents of display for explanation. OPERATION PROCEDURE Request: To protect the compressor at the time of starting, turn on the power supply switch 12 hours before starting run. Moreover, keep the power switch on in the season. Pull the knob towards you to open the cover downward. CAUTION “AUTO SWING” switch are not equipped for FDR, FDU, FDUM, FDFL series.
PAGE 6
PRESENT TIME SETTING PROCEDURE ● The timer is set based on the present time. Adjust the present time correctly at first. COOL REMOTE I SE T TEMP FAN HI A M C O 1 FILTER RESET TIMER CHECK SET TEMP TIME O FAN SPEED 1 Press the timer switch. 2 Press the setting switch. C The [Morning] indication flickers. ● In the case that the present time is in the morning, press the setting switch again.
PAGE 7
FDFL Series ADJUSTMENT OF AIR FLOW To turn the wind direction in the upward or forward direction, turn by hands the louver knobs provided at both sides at the blow air exit on the indoor unit. Cover Louver knob FDT Series 1. Open the covers provided at both sides of the blow air exit on the indoor unit. Swing flap The swing flap swings vertically by the “AUTO SWING” switch. NOTICE (1) Following adjustment is not effective where the panel is not equipped with the auto swing mechanism.
PAGE 8
Care and Cleaning of the unit MAINTENANCE ● ● Points to observe Turn off the power switch. Do not touch the equipment with wet hands. Clean with soft and dry cloth. If it is very dirty, dissolve a neutral detergent in lukewarm water and use this for dampening the cloth. When you have finished wiping, remove the detergent with clean water. Do not use hot water or volatile liquids.
PAGE 9
The following does not mean malfunctions of the unit. FOR POWER FAILURE COMPENSATION You hear a slight gurgling sound. When you start the air conditioner, when the compressor starts or stops during operation or when you stop the air conditioner, you may hear gurgling sound. this means that the refrigerating liquid is circulating, it is quite normal. You hear a slight cracking sound. This is caused by heat expansion or contraction of plastic. Hissing or gurgling sound is heard from the unit stopped.
PAGE 10
WHEN THE CHECK INDICATION LAMP (RED) FLICKERS Error code [E ~] ■ The air-conditioner is in abnormal condition. ● The air-conditioner stops at the same time when the check display lamp begins to flicker. ● The error code on the setting temperature display area, all other indication lamps and the displays go off.