User manual

Model FD-PAC / FDC100VS
Model
Technical specifications
Control kit Outdoor unit
FD-PAC FDC100VS
Nominal coolingcapacity (1) 10000 (6100 ~ 11200)
Nominal heating capacity (1) 11200 (5600 ~ 12500)
Power source 1 fase, 220/230/240V, 50Hz, N, PE
Operation data (3)
Cooling power consumption 2,85/2,85
Running current (cooling) 12,5/13,1
Power factor (cooling) 99/99
Heating power consumption 2,97/2,97
Running current (heating) 13,0/13,6
Power factor (heating) 99/99
Inrush current 5,0
Moise level - 50
Exterior dimensions (height x width x depth) 400 x 300 x 120 845 x 970 x 370
Nett weight 8 74
Compressor type - RM-B5125MD11
Compressor motor - 2,4
Refrigerant oil - 0,9 (M-MA68)
Carterheating - 20 (carterheating)
Starting method - Direct
Heat exchanger - Air (straight fin)
Defrost control Microprocessor controller de-icer
Refrigerant R410A
Refrigerant amount - 3,8 (pre-charged to 30 mtr)
Refrigerant expansion Elektronic expansion valve
Air handling equipment, fan type - Axiaal ventilator x 1
Motor - 120 x 1
Air flow Min.1600 4500
Air entrance temperature cooling min./ max. 16 / 32 -
Air entrance temperature heating min./ max. 10 / 32 -
Water entrance temperature cooling min./
max.
16 / 32 -
Water entrance temperature heating min./
max.
10 / 32 -
Safety equipment
-
Internal thermostat for fanmotor,
anomalous discharge temperature
protection
Refrigerant piping Liquid line 10mm, Gas line 16mm
Piping size Liquid line 9,52 mm (3/8”), Gas line 15,88mm (5/8”)
Connecting method Flare piping
Isolation Necessary (liquid and gasline)
Drain hose - Drain pan3x Ø20 mm
Accessoires -
Paneel (separate packing) -
Optional accessoires - -
Remote controller RC-E3 -
Notes
(1) The data are measured at the following conditions.
Item
Mode
Indoor temperature Outdoor temperature
standard
d.b. temp. w.b. temp. d.b. temp. w.b. temp.
Cooling 27°C 19°C 35°C 24°C
ISO-T1, JIS
B8616
Heating 20°C - 7°C 6°C
(2) This airconditioner is manufactured and tested in conformity with the following standards: ISO-T1”unitary
airconditioner”.
(3) The operation data indicate when the airconditioner is operated at 230V, 50hz.
(4) Values in ( ~ ) show the minimum to maximum range.
(5) Adjustment of the estimated output via DIP switch (see page 16).
-7-