Specifications
PRODUCTS
23
KX-KXR. 
Industry leading energy ef ciency and 
reliability from our advanced technology.
SR.
Residential Air Conditioner.
SCM.
Residential Air Conditioner.
Wired remote control with weekly timer (option)
RC-E5 stores operation data when an anomaly occurs and indicates the error on 
the LCD. It also displays cumulative operation hours of the air conditioner and 
compressor since commissioning. 
Run hour metres to facilitate maintenance checking
RC-E5 provides (as a standard feature) a weekly timer, which allows 
one-week operation schedules to be registered. A user can specify up to 
four times a day to start/stop the air conditioner. (Temperature setting is also 
possible with the timer).
Weekly timer function as standard
 Room temperature controlled
 by the remote control sensor
RC-E5
Simple remote control (option)
It can control up to 16 units individually, by pressing the AIR CON No. button.
 Up to 16 units
This function allows starting the air conditioner automatically when power supply 
is restored after power failure or by turning on the power switch.
 AUTO restart
RCH-E3 (wired)
Considering specialised usage in hotel rooms, 
control buttons are limited only to minimum 
required functions such as ON/OFF, mode, 
temperature setting and fan speed. It is really 
simple and easy to use.
RCH-E3 is not applicable to the Individual ap control 
system and the Flap control system. 
When RCH-E3 is used, the fan has 3 speed settings 
(Hi-Me-Lo) only.
When wireless remote control is used, the fan has 3 speed settings (Hi-Me-Lo) only.
RCN-T-36W-E, 
RCN-TC-24W-ER
RCN-KIT3-E RCN-E-E
For wireless control simply insert the infrared 
receiver kit on a corner of the panel.
SC-THB-E3
This sensor is used when individual remote control is 
not required in each room and the system is under 
central control. By installing sensors in strategic 
locations through out the structure greater comfort 
control is achieved. In many instances one additional 
sensor is all that is required.
The RC-E5 controller enables 
extensive access to service 
and maintenance technical 
data combined with easy to 
use functions and a clear 
LCD display.
Remote Control line up
indoor unit remote control
wired all models
RCH-E3
RC-E5
indoor unit remote control
wireless
RCN-TC-24W-ER
RCN-T-36W-E
FDTC
FDT
RCN-KIT3-EFDUM, FDU
RCN-E-EFDEN
The temperature sensor is housed in the top 
section of the remote control unit. This 
arrangement has improved the sensitivity of the 
remote control unit’s sensor, which permits more 
nely controlled air conditioning.
Changeable range
Upper limit 20~30C(effective for heating operation)
Lower limit 18~26C(effective for non-heating operation)
RC-E5 allows the upper and lower limits of a set temperature range to be 
specied separately.
By adjusting a set temperature range, you can ensure energy saving air 
conditioning by avoiding excessive cooling or heating.
Changeable set temperature ranges
Timer operation
Wireless remote control (option) Thermistor (option)
VRF inverter multi-system
Air-Conditioners
Mitsubishi Heavy Industries offers one of the largest ranges of VRF multi inverter 
products in the industry. The compact M series (11.2 to 15.5kW) is a single fan, single 
phase outdoor that is providing air conditioning solutions all over Australia and New 
Zealand. The larger side blow (22.4 to 33.5kW) and top discharge (40 to 68kW) units 
can be used singularly or in combination to deliver up to 136kW of heat pump or heat 
recovery technology and energy saving in high rise and mid rise structures. With 16 
types of indoor units and 78 different capacities available designs are only limited by 
imagination. Our eSolution software makes selection simple. 
The Superlink
II network can control up to 128 indoor units via a central control or 
BMS interface such as Web or BACnet gateways. Mente PC can be connected for 
fault  nding and recording test run reports.
Mitsubishi Heavy Industries wall mounted and  oor standing 
inverter split systems are the ideal choice to control comfort in 
any residential situation.
Mitsubishi Heavy Industries residential air conditioners have 
received rave reviews in consumer magazines here and 
overseas when tested and compared to the competitions 
similar products. Energy ef ciency, quite operation and ease of 
use were the standout differences. 
These residential use inverter multi system can condition 
2 to 6 rooms using either wall mounted,  oor standing, 
low static bulkhead or compact cassette type indoor units. 
The SCM series offers a total of 7 outdoor units and many
 indoor units making hundreds of different comfort 
combinations possible. Perfect for homes and apartments.










