Specifications

22
FD series Inverter Packaged Air Conditioners 2013
Control System.
Individual Control.
Wired remote control with weekly timer (option)
RC-E5 stores operation data when an anomaly occurs and indicates the error on
the LCD. It also displays cumulative operation hours of the air conditioner and
compressor since commissioning.
Run hour metres to facilitate maintenance checking
RC-E5 provides (as a standard feature) a weekly timer, which allows
one-week operation schedules to be registered. A user can specify up to
four times a day to start/stop the air conditioner. (Temperature setting is also
possible with the timer).
Weekly timer function as standard
Room temperature controlled
by the remote control sensor
RC-E5
Simple remote control (option)
It can control up to 16 units individually, by pressing the AIR CON No. button.
Up to 16 units
This function allows starting the air conditioner automatically when power supply
is restored after power failure or by turning on the power switch.
AUTO restart
RCH-E3 (wired)
Considering specialised usage in hotel rooms,
control buttons are limited only to minimum
required functions such as ON/OFF, mode,
temperature setting and fan speed. It is really
simple and easy to use.
RCH-E3 is not applicable to the Individual ap control
system and the Flap control system.
When RCH-E3 is used, the fan has 3 speed settings
(Hi-Me-Lo) only.
When wireless remote control is used, the fan has 3 speed settings (Hi-Me-Lo) only.
RCN-T-36W-E,
RCN-TC-24W-ER
RCN-KIT3-E RCN-E-E
For wireless control simply insert the infrared
receiver kit on a corner of the panel.
SC-THB-E3
This sensor is used when individual remote control is
not required in each room and the system is under
central control. By installing sensors in strategic
locations through out the structure greater comfort
control is achieved. In many instances one additional
sensor is all that is required.
The RC-E5 controller enables
extensive access to service
and maintenance technical
data combined with easy to
use functions and a clear
LCD display.
Remote Control line up
indoor unit remote control
wired all models
RCH-E3
RC-E5
indoor unit remote control
wireless
RCN-TC-24W-ER
RCN-T-36W-E
FDTC
FDT
RCN-KIT3-EFDUM, FDU
RCN-E-EFDEN
The temperature sensor is housed in the top
section of the remote control unit. This
arrangement has improved the sensitivity of the
remote control unit’s sensor, which permits more
nely controlled air conditioning.
Changeable range
Upper limit 20~30C(effective for heating operation)
Lower limit 18~26C(effective for non-heating operation)
RC-E5 allows the upper and lower limits of a set temperature range to be
specied separately.
By adjusting a set temperature range, you can ensure energy saving air
conditioning by avoiding excessive cooling or heating.
Changeable set temperature ranges
Timer operation
Wireless remote control (option) Thermistor (option)