Specifications

5
Thanks to optimization of refrigeration control with use of electric
expansion valve and development of new twin rotary compressors,
max heating capacity has been increased.
Hyper Inverter series can reach the set temperature very quickly,
keeping nominal heating capacity when outdoor temperature is -15°C.
It is effective to be used even in cold area.
Temperature of supply air can reach 40°C
in 4 minutes after start up under low
temperature operation conditions (at both
indoor and outdoor temperature of 2°C)
and can reach 50°C in 8 minutes after that.
FDC100VSX(4HP, 3phase 380V)
FDC125VSX(5HP, 3phase 380V)
FDC140VSX(6HP, 3phase 380V)
11.2kW
14.0kW
16.0kW
nominal heating capacity
(kW at outdoor temperature of 7°C)
model name
11.2kW
14.0kW
16.0kW
heating capacity
at outdoor temperature of -15°C
Heating capacity (in case of 5HP, 3phase 380V)
nominal
heating
capacity
14.0kW
Keeping nominal heating
capacity at -15°C
(kW)
18.0
14.5
14.0
8.8
0
-15°C2°C7°C
Hyper Inverter
Micro Inverter
Heating capacity
50°C
40°C
30°C
20°C
10°C
0°C
4minutes 8minutes
Hyper Inverter
Micro Inverter
Please refer to our technical manual for installation conditions, operation range and heating/cooling capacities.
(including 1phase 220V)
Leading powerful heating capacity in the industry
Employment of the scroll
inverter compressors
(8/10HP)
A control over wide range of capacity and a high efficiency has
been realized by inverter-driven scroll compressors.
In addition, the starting current significantly is improved.
The size has also been reduced by 3.2% in height and 31.8% in
volume.
Wide range of operation
Compact Design of outdoor units
Our new advanced technology has expanded the heating and cooling
operation range.
This permits installation of the units under a low outdoor temperature
conditions down to -20°C In heating operation and -15°C in cooling
operation.
* Vector control means
a. technique to realize
an optimum control by
converting the current
wave to a smooth
sinusoidal waveform
Employment of DC twin rotary compressor has enabled to utilize a high-
speed range of up to 120 rps at the maximum to secure the required
capacity.
Optimum compressor control has been realized by employing the vector
control* and the starting current has been improved significantly
compared with former models. Moreover, vibration has been reduced.
Former
compressor
New model
DC rotary compressor
Height at 440 mm
Outside diameter of shell
ø185mm
Height at 342mm
Reduction in height by 22.3%
Reduction in volume by 44.1%
ø133mm
Micro Inverter
Size reduction and high efficiency
performance on the DC twin
rotary compressors(Micro Inverter 4-6HP)
(FDC 100/125/140)
50403020100-10-20-30
Heating
Cooling
+43°C
+20°C
-15°C
-20°C
Micro Inverter
1.5 2 2.5 3
----
4 5 6 8 10
HP
Line up
FDC100VN/VS (4.0HP)
FDC125VN/VS (5.0HP)
FDC140VN/VS (6.0HP)
FDC200VS
(8.0HP)
FDC250VS
(10.0HP)
Fits into elevators
Easy installation