Specifications

44
indoor unit remote control
wired all models
RC-E5
RCH-E3
RC-EX1A
Wired remote control with weekly timer (option)
RC-E5 stores operation data when an anomaly occurs and indicates the error
on the LCD. It also displays cumulative operation hours of the air conditioner
and compressor since commissioning.
Run hour meters to facilitate maintenance checking
RC-E5 provides (as a standard feature) a weekly timer, which allows one-
week operation schedules to be registered. A user can specify up to four
times a day to start/stop the air conditioner. (Temperature setting is also
possible with the timer).
Weekly timer function as standard
Room temperature controlled
by the remote control sensor
Control Systems [Individual control]
RC-E5
Simple remote control (option)
It can control up to 16 units individually, with pressing the AIR CON No. button.
Up to 16 units
This function allows starting the air conditioner automatically when power
supply is restored after power failure or by turning on the power switch.
AUTO restart
RCH-E3 (wired)
Considering specialized usage in hotel
rooms, control buttons are limited only to
minimum required functions such as ON/OFF,
mode, temperature setting and fan speed. It
is really simple and easy to use.
RCH-E3 is not applicable to the Individual flap control
system and the Flap control system.
When RCH-E3 is used, the fan has 3 speed settings (Hi-
Me-Lo) only.
Wireless remote control is not applicable to the Individual flap control system and the Flap control system.
When wireless remote control and RCH-E3 are used, the fan has 3 speed settings (Hi-Me-Lo) only.
RCN-T-36W-E,
RCN-TC-24W-ER
RCN-KIT3-E RCN-E1R
For wireless control simply insert the infrared
receiver kit on a corner of the panel.
SC-THB-E3
In case sensor in the indoor units or the remote
control sensor can not sense the room temperature
correctly, or individual remote control in each room is
not required but only censor is required (as when
center control system is in place), install SC-THB-E3
at proper place in the rooms.
The RC-E5 control enables
extensive access to service
and maintenance technical
data combined with easy to
use functions and a clear
LCD display.
Remote Control line up
indoor unit remote control
wireless
RCN-TC-24W-ER
RCN-T-36W-E
FDTC
FDT
RCN-KIT3-EFDUM, FDU, FDF
RCN-E1RFDEN
The temperature sensor is housed in the top
section of the remote control unit. This
arrangement has improved the sensitivity of the
remote control unit’s sensor, which permits more
finely controlled air conditioning.
Changeable range
Upper limit 20~30°C(effective for heating operation)
Lower limit 18~26°C(effective for non-heating operation)
RC-E5 allows the upper and lower limits of a set temperature range to be
specified separately.
By adjusting a set temperature range, you can ensure energy saving air
conditioning by avoiding excessive cooling or heating.
Changeable set temperature ranges
Timer operation
Wireless remote control (option) Thermistor (option)