Specifications

27
R410A
A
FDC200VS
(8.0HP)
FDC71VNX
(3.0HP)
FDC250VS
(10.0HP)
OUTDOOR UNIT (1.5-10.0HP)
Installation workability
Enhanced installation workability thanks to the extended pipe length – longest level
in the industry and pre-charged refrigerant.
Refrigerant precharged piping length extends up to 30m. (1.5~2.5HP:15m)
This eliminates the need to add refrigerant on site, which sets it free from trouble of excessive or insufficient charging of refrigerant, and allows
carrying out the installation smoothly.
Point
1
Piping length – 100m
(Hyper Inverter 4~6HP)
Point
2
Refrigerant precharged piping length extending to 30m
Hyper Inverter
Hyper Inverter
Micro Inverter
Micro Inverter
FDC125VNX
FDC125VSX
(5.0HP)
FDC140VNX
FDC140VSX
(6.0HP)
FDC100VNX
FDC100VSX
(4.0HP)
SRC40ZJX-S
SRC50ZJX-S
*
SRC60ZJX-S
*
(1.5HP~2.5HP)
*
SRC50/60ZJX-S is common for both of outdoor units of
SRK50/60ZJX-S (Residential Air-conditioners) and 1.5,
2, 2.5HP of Inverter Packaged Air-Conditioners.
Common components make for easy inventory control
and the installation procedure will be the same.
Due to application of blue coated fins (KS101)
for the heat exchanger of new outdoor unit,
corrosion resistance has been improved
compared to current models.
Blue Fin (3~10HP)
This kit is recommended to be used in
an area where the lowest temperature
drops below 0˚C.
Base heater kit (option)
CW-H-E1
applied for
FDC71VNX
FDC100~250VN,VS
FDC100~140VNX,VSX
Height difference
(Outdoor higher than Indoor)
Piping
length
Micro Inverter
HP
1.5~2.5
3
4~6
30m
50m
100m
20m
30m
30m
Piping
length
Height
difference
Height difference
(Outdoor higher than Indoor)
Piping
length
HP
4~6
8
.
10
50m
70m
30m
30m
Piping
length
Height
difference
FDC100VN
FDC125VN
FDC140VN
FDC100VS
FDC125VS
FDC140VS
(4.0HP~6.0HP)
Refer to our Technical Manual in detail