Specifications

98
FDT
CEILING CASSETTE -4way-
Dimensions (Unit:mm)
R410A
Easy checking of drain pan
condition is available by
removing corner lid only.
Due to new design
changing fan motor is
available without removing
a panel. Temporally setting
of drain pan is also
available.
Point
2
Easy checking of drain pan
Drain can be discharged
upwards by 700mm from the
ceiling surface. It allows a
piping layout with a high
degree of freedom
Depending on the installation
location and 260mm flexible
hose as a standard
equipment supports easy
workability.
Point
3
700mm Drain Pump
SPECIFICATIONS
The data are measured under the following conditions(ISO-T1).
Cooling:Indoor temp. of 27˚CDB, 19˚CWB, and outdoor temp. of 35˚CDB. Heating:Indoor temp. of 20˚CDB, and outdoor temp. of 7˚CDB, 6˚CWB.
*
1 : Indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions.
*
2 : If a cooling operation is conducted when the outdoor air temperature is –5˚C or lower, the outdoor unit should be installed at a place where it is not influenced by natural
wind. If wind blows, the low pressure will drop and compressor frequency will increase, this will cause the capacity to drop and may cause the unit to break down.
SPECIFICATIONS
Flexible hose
less than
700mm
Models FDT100VF1,125VF,140VFModels FDT40VF,50VF,60VF,71VF1
[ INDOOR UNIT ]
Point
1
Arrangement of installation
balance of indoor unit
Checking from access ports with
detachable covers at each corner,
arrangement of installation balance of
indoor unit can be available without
removing a panel. Workability is improved
and time of installation is reduced.
Powerful-Hi can be selected. Sound level: 40/50ZMXVF 39dB, 60ZMXVF 46dB, 71VNXVF1 46dB, 100VN(S)XVF1 51dB, 125/140VN(S)XVF 51dB
Air flow: 40/50ZMXVF 20m
3
/min, 60ZMXVF 28m
3
/min, 71VNXVF1 28m
3
/min, 100VN(S)XVF1 37m
3
/min, 125/140VN(S)XVF 37m
3
/min
RCN-T-36W-E
Wireless
RC-E5
Wired
RCH-E3
RC-EX1A
FDT 40/50/60/71/
100/125/140
Remote control (Option)