Specifications

3938
SRK 50/60
R410A
We used the same aerodynamic
analysis technology as used in
developing jet engines.
Point
1
Jet Air Scroll
SPECIFICATIONS
The data are measured under the following conditions (ISO-T1).
Cooling:Indoor temp. of 27˚CDB, 19˚CWB, and outdoor temp. of 35˚CDB. Heating:Indoor temp. of 20˚CDB, and outdoor temp. of 7˚CDB, 6˚CWB.
*
1 : Indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions.
*
2 : The values are for one indoor unit operation.
*
3 : If a cooling operation is conducted when the outdoor air temperature is –5˚C or lower, the outdoor unit should be installed at a place where it is not influenced by natural
wind. If wind blows, the low pressure will drop and compressor frequency will increase, this will cause the capacity to drop and may cause the unit to break down.
SRK
WALL MOUNTED
CFD (computational fluid dynamics),
used in blade shape design of jet
engines, has been applied to the design
of air channels in air conditioners to
develop the ideal air channel system (air
circulation). The airflow of the jets
created in this system enable a large
volume of air to be blown with minimum
power consumption, yet the air flow is
uniform, quiet and reaches points a long
distance from the blower.
Powerful airflow is realized by Jet technology.
Good for large living rooms and shops.
Increase your comfort.
Point
2
Long Reach Air Flow
15m
15m15m15m
SRK50/60ZMX
(in cooling operation)
Fast Slow
Colors in the figure show the air speed.
Max four indoor units are connectable.
SC-BIKN-E
RC-EX1A
RC-E5
SC-BIKN-E
Only used with outdoor units of TWIN, TRIPLE, MULTI System.
The values are for simultaneous Multi operation.
SPECIFICATIONS
The values are for simultaneous Multi operation.
Dimensions (Unit:mm)
890
309
60
21
881.9
6026
46.5
61.5
46.5 61.5
220
122.1
3
9
3.1
Piping hole
right
(right, left)61.5
Terminal block
MULTI [ INDOOR UNIT ]
RC-E5
Wired remote control
(Option)
RCH-E3
RC-EX1A