Specifications

1918
Dimensions (Unit:mm)
R410A
Piping and drain hose connection can be selected out of 4-directions
and the selection makes installation workability more effective.
Due to slim design (Depth: 320mm), easy transportation and
installation are realized.
Easy Maintenance
The surface of heat exchanger can be appeared only removing the
front panel. Easy cleaning of heat exchanger is possible.
Point
1
Wide and powerful air flow
SPECIFICATIONS
SPECIFICATIONS
The data are measured under the following conditions(ISO-T1).
Cooling:Indoor temp. of 27˚CDB, 19˚CWB, and outdoor temp. of 35˚CDB. Heating:Indoor temp. of 20˚CDB, and outdoor temp. of 7˚CDB, 6˚CWB.
*
1 : Indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions.
*
2 : If a cooling operation is conducted when the outdoor air temperature is –5˚C or lower, the outdoor unit should be installed at a place where it is not influenced by natural
wind. If wind blows, the low pressure will drop and compressor frequency will increase, this will cause the capacity to drop and may cause the unit to break down.
FDF
FLOOR STANDING
Powerful-Hi can be selected. Sound level:71VNXVD1 42dB, 100VN(S)XVD1 54dB, 125/140VN(S)XVD 54dB
Air flow: 71VNXVD1 20m
3
/min, 100VN(S)XVD1 29m
3
/min, 125/140VN(S)XVD 29m
3
/min
[ INDOOR UNIT ]
RCN-KIT3-E
Wireless
remote control
(Option)
Wide and powerful air flow increase your comfort, realizing high
efficiency in combination with our highly advanced outdoor units.
Point
2
Easy Transportation and Installation workability
FDF 71/100/125/140