Specifications

1514
SPECIFICATIONS
R410A
The data are measured under the following conditions(ISO-T1).
Cooling:Indoor temp. of 27˚CDB, 19˚CWB, and outdoor temp. of 35˚CDB. Heating:Indoor temp. of 20˚CDB, and outdoor temp. of 7˚CDB, 6˚CWB.
External static pressure is 35Pa (40/50/60/71), 60Pa (100/125/140).
*
1 : Indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions.
*
2 : External static pressure is changeable to be set by the remote control. MAX external static pressure is ''High static pressure'' setting. The values of sound pressure level
become 5dB(A) higher at external static pressure of 100Pa.
*
3 : If a cooling operation is conducted when the outdoor air temperature is –5˚C or lower, the outdoor unit should be installed at a place where it is not influenced by natural
wind. If wind blows, the low pressure will drop and compressor frequency will increase, this will cause the capacity to drop and may cause the unit to break down.
FDUM
DUCT CONNECTED -Middle Static pressure-
FDUM 40/50/60/71/
100/125/140
Dimensions (Unit:mm)
Model FDUM40VF, FDUM50VF
Models FDUM100VF1,125VF,140VF
Models FDUM60VF,71VF1
Automatic external static pressure (E.S.P.) control
SPECIFICATIONS
Powerful-Hi can be selected. Sound level: 40ZMXVF/50ZMXVF 37dB, 60ZMXVF 36dB, 71VNXVF1 38dB, 100VN(S)XVF1 44dB, 125VN(S)XVF 45dB, 140VN(S)XVF 47dB
Air flow: 40ZMXVF/50ZMXVF 13m
3
/min, 60ZMXVF 20m
3
/min, 71VNXVF1 24m
3
/min, 100VN(S)XVF1 36m
3
/min, 125VN(S)XVF 39m
3
/min, 140VN(S)XVF 48m
3
/min
[ INDOOR UNIT ]
RC-E5RC-EX1A
Wired
RCH-E3
Filter kit (option)
UM-FL1EF : for 40, 50
UM-FL2EF : for 60, 71
UM-FL3EF : for 100, 125, 140
external static pressure loss:5Pa
RCN-KIT3-E
Wireless
Remote control (Option)
Round duct adapter
In case of requirements of
round duct adapter, please
access the followings for
details.
Company
e-mail
tel
: AIRZONE
: [e-mail]
: [phone]
Duct design was simplified.
Using DC motor, the most optimum air flow volume can be achieved by
this automatic control.
Indoor unit will recognize external static pressure by itself automatically
and keep rated air flow volume.
Keep the same
air flow volume
Longer DuctDuct
Ceiling
New
FDUM
Duct
Setting No.
E.S.P.
No.1
10Pa
No.2
20Pa
No.3
30Pa
No.4
40Pa
No.5
50Pa
No.6
60Pa
No.7
70Pa
No.8
80Pa
No.9
90Pa
No.10
100Pa
External Static Pressure (E.S.P.)
can be set by E.S.P. button.
E.S.P. button
RC-E5