Operation Manual
EN-32
Network settings (continued)
How to Use Network Function
1 When connecting a computer and projector with LAN, config-
ure the both IP Addresses in the same network group.
If connecting in different network group, be sure to use a
router. As for the settings of a router, ask the network adminis-
trator.
1onfigure the IP NFIG correctly. If the settings are not cor-
rect, the communication may be unavailable. For the detail,
consult the network administrator.
1epending on the settings of standby mode of the projector,
LAN function may be unavailable. See page 23 for the detail of
standby mode.
Glossary
For more detail of the glossary below, refer to the technical book that
is commercially available.
Te r m *) '+ &n
P
Abbreviation fo)/%$ &*+&%0,)+ &%
Protocol. This protocol automatically assigns IP
Address to networked devices.
IP Address
Numerical address to identify networked comput-
ers.
Subnet Mask
A numeric value to define the number of bits
used for a network address of a divided network
(or subnet) in an IP Address.
ault Gate-
way
A server (or router) to communicate across net-
works (subnets) that are divided by Subnet
Mask.
MA)ess
Abbreviation fo) **&%+rol Address.
MAAddress is a unique number assigned to
each network adapter. And this is based on
which data are sent and received between net-
work adapters.