Specifications

Graphic Operation Terminal GOT-F900 Creation of Display Screens 6
6-25
6.6 Interface Devices and system information
Devices are required to be assigned to change over the display screen of the GOT from the
PLC or to read the status information including the battery status in the GOT and the alarm
occurrence data from the PLC. The term "Interface Devices" is used in FX-PCS-DU/WIN-E.
The term "System Information" is used in GT Designer.
6.6.1 Interface Devices (setting in FX-PCS-DU/WIN-E)
• Bit devices: 11 bit devices (X, Y, M, S, T and C) in the PLC are occupied. M0 to M10 are
specified when the GOT is shipped from the factory.
• Word devices: Eight word devices (D, T and C) in the PLC are occupied. D0 to D7 are
specified when the GOT is shipped from the factory.
Details of bit devices
• Occupied bit devices are used for communication using ON/OFF signals.
[ When auxiliary relay M0 is assigned ]
*1 The PLC gives instructions to the GOT. Coils are turned ON/OFF in the PLC programs.
*2 The GOT transmits the information to the PLC. Contacts are used in the PLC programs.
Auxiliary
relay
Contents of control
*1 M0 When set to ON from OFF, clears the alarm history.
*2 M1 Remains ON while the device assigned by the alarm function is ON.
*1
M2
When set to ON, extinguishes the backlight of the display screen after the
specified time.
M3
When set to ON from OFF, clears the sampling data acquired in the sampling
mode.
*2
M4 Remains ON while sampling is executed in the sampling mode.
M5 Turns ON as the numeric value setting completion flag.
M6 Turns ON when the battery of the GOT is deteriorated.
M7
Remains ON while the grip switch is pressed and held in the handy GOT
(excluding the robot handy GOT).
M8
Turns ON when the data read from the bar code reader is stored in the PLC.
Turns OFF when the control device M10 is set to ON.
*1
M9
When set to ON, nullifies bar code inputs and clears the data read by the GOT
while the bar code reader is connected.
M10 When set to ON, sets to OFF the M8.