Specifications

Graphic Operation Terminal GOT-F900 Creation of Display Screens 6
6-15
6.5.1 The writing function of the initial display screen number (GT Designer is used.)
When the GOT is turned ON, user screen No. 1 will be displayed.
To display this screen, the GOT writes’1’ in the data register assigned in GT Designer for PLC
screen changeover (base screen) at power ON.
The user can set a different screen to be displayed at power ON, in this location.
Applicable version
GOT
Screen creation software
• Set method
1) Select "OTHER MODE" - "SET-UP MODE" - "AUXILIARY SETTING".
2) Select "WRITE" or "DOES NOT WRITE".
An initial value is "WRITE".
* When using the F920GOT-K, settings can be made when only using GT Designer
(system screen settings in the GOT are unavailable).
WRITE : Mode to write "1" in registered for screen change when power
supply is turned ON.
DOES NOT WRITE: Mode not to write "1" is registered for screen change when power
supply is turned ON.
When a number is set in the data register assigned for screen
changeover, the screen No. 1 is displayed and then the screen
corresponding to the current value is displayed after that.
Product type name Version
F920GOT-K From fist product
F930GOT-K From fist product
F930GOT, F933GOT V4.00
F940GOT, F943GOT V5.00
F940WGOT V1.00
Product type name Version
GT Designer SW5D5C-GOTR-PACKE or later
FX-PCS-DU/WIN-E Not available.