Specifications

Graphic Operation Terminal GOT-F900 Creation of Display Screens 6
6-10
6.4 Concept on screen display
• To display a screen
- Each screen should be created using characters and graphics.
When FX-PCS-DU/WIN-E is used: Refer to Chapter 19.
When GT Designer is used: Refer to Chapter 21.
• To change over screens
- Screen changeover should be set.
When FX-PCS-DU/WIN-E is used: Refer to Chapter 20.
When GT Designer is used: Refer to Chapter 22.
6.4.1 Screen display position
The display position of each screen construction element can be specified in dots.
Touch keys should be positioned according to the following mesh.
The meshes and matrix configuration of each GOT is as follows.
(One mesh consists of 16
×
20 dots.)
F930GOT, F933GOT, F930GOT-K : 15 (horizontal)
×
4 (vertical)
F940GOT, F943GOT : 20 (horizontal)
×
12 (vertical)
F940WGOT : 30 (horizontal)
×
12 (vertical)
Last column composed of 14 dots
6.4.2 Number of display screens and screen numbers
• Up to 500 screens can be displayed.
• A screen number is assigned to each display screen.
When FX-PCS-DU/WIN-E is used: No. 0 to No. 499
When GT Designer is used: No. 1 to No. 500
* Although the first screen number is different, it is automatically converted while it is read in
accordance with the used software.
6.4.3 Number of display elements and data capacity
Each display element is managed as screen data. The allowable number of screens is
restricted as shown below.
Item Description
Total screen data
size
F920GOT-K
128KB (user screens etc)
F930GOT
F933GOT
F930GOT-K
256KB (user screens etc)
F940GOT
F943GOT
512KB (user screens etc)
F940WGOT
1MB (user screens etc)
Allowable number of screens
User screens:
Up to 500 screens
FX-PCS-DU/WIN-E: No. 0 to No. 499
GT Designer: No. 1 to No. 500
System screens:
12 screens in the F920GOT-K.
25 screens in the F930GOT-K, F930GOT and F933GOT.
30 screens in the F940GOT, F943GOT and F940WGOT.
Screen No. 1001 to No. 1030.