Specifications

Graphic Operation Terminal GOT-F900 Creation of Display Screens 6
6-8
2) Setting of display screen changeover
• Screen number (Refer to Section 6.4.2.)
a) FX-PCS-DU/WIN-E:
Screen numbers are automatically converted into No. 0 to No. 499, then transferred (in
both read and write).
b) GT Designer:
Screen numbers are automatically converted into No. 1 to No. 500, then transferred (in
both read and write).
* When the No. of a screen to be displayed is specified from the PLC, a converted screen
No. is transferred to the GOT. Accordingly, the used sequence program is required to be
changed.
• Handling of common setting screen
The contents set on the common setting screen in FX-PCS-DU/WIN-E are treated as
screen number 501 in GT Designer.
However, screen No. 501 is treated as a user screen, so the contents of screen number
501 are not shared by all screens in the same way as FX-PCS-DU/WIN-E. The screen
overlay function (overlap window 1 or 2) or the screen call function should be used so that
the contents of screen number 501 are shared by all screens.
• Background color of screen
When screen data created using FX-PCS-DU/WIN-E is transferred to GOT and then read
using GT Designer of SW3D5C-GOTR-PACKE(B) or before, the background colors are all
converted to "Black".
If you want to change the background color, do so using "Screen" in "Auxiliary Setting".
When such data is read using GT Designer of SW3D5C-GOTR-PACKE(C) or later, the
background colors are read as they are.