Specifications

Graphic Operation Terminal GOT-F900 Creation of Display Screens 6
6-7
6.2 Transfer of screen data
Pay rigid attention to the cautions below when screen data created in FX-PCS-DU/WIN-E is
read/written using GT Designer or when screen data created in GT Designer is read/written
using FX-PCS-DU/WIN-E.
If unavailable settings are contained in the screen data, an alarm message is displayed when
the screen data is read. In such a case, check the contents of the screen data.
1) Screen data
• Read/write of the functions dedicated to FX-PCS-DU/WIN-E (Refer to Section 6.1.1.)
a) FX-PCS-DU/WIN-E:
No problems are expected in both read and write.
b) GT Designer:
If the GOT has dedicated functions, such functions are not read.
• Setting of display screen changeover (Refer to Section 6.1.2.)
a) FX-PCS-DU/WIN-E:
Names and contents of the functions are automatically converted into those used in the
software.
b) GT Designer:
Names and contents of the functions are automatically converted into those used in the
software.
• Functions dedicated to GT Designer (Refer to Section 6.1.3.)
a) FX-PCS-DU/WIN-E:
These functions cannot be set in the GOT. (That is, these functions cannot be read nor
written.)
b) GT Designer:
These functions cannot be set in the GOT. (That is, these functions cannot be read or
written.)
FX-PCS-DU/WIN-E GT Desi
g
nerGOT
a
)
b
)