Specifications

Graphic Operation Terminal GOT-F900 Creation of Display Screens 6
6-6
6.1.3 Functions dedicated to GT Designer
The functions shown below are dedicated to GOT-A900. They are not available in the
F900GOT. (For details of these functions, refer to the operation manual of GT Designer.)
1) Screen display
Line Freeform : Displays a line indicating a zigzag or polygon in one stroke.
In the F900GOT, two or more lines can be used to display such a figure.
Polygon : Displays a polygon.
In the F900GOT, two or more lines can be used to display a polygon.
Sector : Displays a sector.
Arc : Displays an eclipse.
Scale : Displays the scale for bar graphs and panel meters
In the F900GOT, the scale function is given to bar graphs and meters.
Paint : Paints (fills) a specified area (which may be a polygon).
In the F900GOT, boxes and circles can be filled.
Data List : Displays the data list in the form of a table.
Level : Displays the level within a specified image range.
In the F900GOT, the level can be expressed in the form of bar graph
(box).
Part Movement : Moves displayed parts on a specified trace.
2) Printer output
Report : Outputs the data to the printer in accordance with a specified format.
3) Noise output
Noises can be output.
In the F900GOT, buzzer sounds can be issued.
4) Window screen
A window can overlay the display screen.
5) Station number changeover
When two or more A900GOT units access the PLC, the A900GOT unit number which is to
access the PLC can be specified.
In the case of F900GOT, up to four units can access an FX Series PLC without specifying
the station number.