Specifications

Graphic Operation Terminal GOT-F900 Start Up 5
5-21
1) Function to display error messages at entry code input
Previously no error message was displayed at the time of incorrect entry code input or
switching to protected screens.
Now it is possible to produce an error display by setting it as shown below.
• Setting for GT-Designer (SW5D5C-GOTR-PACKE)
a) The following window can be displayed by using "Common"
→
"Password".
• Entry code input and contents of error message
• Only numbers 0 to 9 can be used for an entry code in the F920GOT-K.
2) Level device setting function
By setting as shown below, the current security level (0 to 15) set on the GOT can be
checked through the PLC.
• Setting for GT-Designer (SW5D5C-GOTR-PACKE)
a) The window shown in the previous page can be displayed by using "Common"
→
"Password".
b) When the "Level device" item is checked, device setting for security level can be made.
By checking the current set value of the device here, you know the current security level.
Error message
Password is incorrect.
When the entered entry code is incorrect
(Enter the correct entry code.)
This operation is not permitted.
When switching to a high-security-level screen is
attempted
(It is necessary to enter the entry code.)
When it is checked, the level
device setting is enabled.
(See 2) in the next page.)
When it is checked, an error
message is displayed at the
time of incorrect entry code
input.