Specifications

Graphic Operation Terminal GOT-F900 Start Up 5
5-19
5.4.3 Reset of entry code
To reset an entry code and return to the initial setting (in which security is valid), a touch key
should be provided on the screen.
• To set this touch key, enter "FF69" to the key code.
• The entry code is reset also when the power of the GOT is turned off. When the power is
turned on at the next time, the security is valid.
• In order to reset the entry code in the F920GOT-K, press the ESC key and then 9 when the
screen is not waiting for numerical key-in (when the cursor is not displayed).
Use example
• Suppose that the security level is set in the screen creation software for Screens 1 to 5
shown above.
• In this case, Screen 1 is displayed when the power is turned on (Level 0).
• When an entry code "222" is entered, Screens 1 to 3 can be displayed and manipulated.
• When an entry code "444" is entered while Screens 1 to 3 are displayed, Screens 1 to 5 can
be displayed and manipulated.
• When the entry code is reset while Screens 1 to 5 are displayed, Screen 1 is displayed
(initial status).
* In the use example shown above, the levels and the screen numbers are consecutive for
easy understanding. The levels and the screen numbers are not necessarily consecutive.
Example: Screen 1 : Level 3
Screen 2 : Level 7
Screen 3 : Level 5
Screen 10 : Level 2
Screen example
Reset of entr
y
code Touch ke
y
Level 2
Entr
y
code
:222
Screen 3
Level 1
Entr
y
code
:111
Screen 2
Level 0
Entr
y
code
Nothin
g
Screen 1
Level 3
Entr
y
code
:333
Screen 4
Level 4
Entr
y
code
:444
Screen 5