Specifications

Graphic Operation Terminal GOT-F900 Start Up 5
5-13
5.2.13 AUXILIARY SETTING
• The start-up screen in the GOT is numbered as follows.
- When created with FX-PCS-DU/WIN-E:
beginning with screen number 0
- When created with GT Designer:
beginning with screen number 1
If "WRITE" is selected when the GT Designer is used,
"1" is written to the device specifying the base screen
when the power is turned ON.
When specifying a screen to be displayed by using a
program in the PLC when the PLC is changed over from
the STOP status to the RUN status, select "NOT
WRITE".
This function is invalid when the FX-PCS-DU/WIN-E is
used.
• When using FX-PCS-DU/WIN-E, the setting in a
common screen must be set up so that the screen
change is always performed by PLC devices.
• This item is not available in the F920GOT-K.
WRI TE
[ AUXILIARY SETTING ]
END
[ AUXILIARY SETTING ]
INIT SCREEN NO: