Specifications

Graphic Operation Terminal GOT-F900 Start Up 5
5-8
5.2.6 MAIN MENU CALL KEY
• Set the main menu call ke
y
which chan
g
es over USER
SCREEN MODE to the SELECT MODE.
The main menu call ke
y
is mesh t
y
pe, and 2
×
2 in size.
(
Initial: On the left
)
• One or two corners can be selected among the four
corners of the screen.
• When the main menu call key is not set, only the
USER SCREEN MODE is available. Any other
mode is not available.
(In order to display the MAIN MENU, turn on the
power again pressing the top left hand corner of
the screen and hold it for more than 1 second.)
• If another touch key is assigned to the corners to
which the main menu call key has been assigned, the
menu call function is disabled.
• Manipulation of the key-pad is required in the
F920GOT-K.
When the MAIN MENU CALL KEY is selected, VALID
or INVALID is displayed. Press the
!
/
$
key to select
either one and press the ESC key to exit the setting.
VALID: When the DEV key is pressed while a user
screen is being displayed, the screen is
changed over to the MAIN MENU.
INVALID: The screen is not changed over from a user
screen to the MAIN MENU.
Turn on the power again pressing the DEV
key for more than 1 second if the MAIN
MENU screen is required.
SELECT CALL KEY LOCATION
[ MAIN MENU CALL KEY ]
END
[ MAIN MENU CALL KEY ]