Specifications

Graphic Operation Terminal GOT-F900 Start Up 5
5-4
e) MAIN MENU CALL KEY
Allows setting of the position of the touch key which calls the SELECT MODE screen
from the USER SCREEN MODE
f) SET CLOCK
Allows setting of the time used in the time switch and time display
g) SET BACKLIGHT
Allows setting of the time the backlight is automatically turned OFF, after a period of
continuous idle time
h) BUZZER
Allows setting of the buzzer sound issued when a key is pressed
i) LCD CONTRAST (F940WGOT: BRIGHTNESS)
Allows setting of the LCD brightness
j) CLEAR USER DATA
Deletes all user screen data
k) HANDY GOT SETTING
Allows setting of the grip switch or LED (Only in Handy GOT)
l
)
AUXILIARY SETTING
Choose "WRITE" or "DOES NOT WRITE" for the initial displa
y
screen number to a PLC
m) END
Exits the SET-UP MODE screen. SELECT MODE is displayed.
n) Cursors
Change over the menu item on the SET-UP MODE screen
#
##
#
Important point
• When the items a) to e), g), h), k) and n) above are set in the GOT and screen data is
transferred from the screen creation software, the system settings selected in the screen
creation software becomes valid. In such a case, set the system settings in the GOT again
or align from the beginning the setting of the items a) to e), g) and h) above with that in the
screen creation software.
• A system setting with the GOT main unit is stored in RAM. (Refer to Section 1.8)
(When using the F920GOT-K, settings are stored in the EEPROM.)