Specifications

Function 4
4-1
4. Function
4.1 Function list
The functions of the GOT are divided into 6 modes. The operator can use each function by
selecting the corresponding mode.
Mode Function Outline of function
Reference
chapters
USER
SCREEN
MODE
Character
display
Alphanumerics are displayed.
7
19
21
Drawing Straight lines, circles and rectangles are displayed.
Lamp display
The color of a specified area on the screen is inverted in
accordance with the ON/OFF status of the bit devices in
the PLC.
Graphic display
Set values and current values of the word devices in the
PLC can be displayed in the form of bar graph, line graph
or panel meter.
Data display
Set values and current values of the word devices in the
PLC can be displayed in the form of numeric.
Data change
function
Current values and set values of the word devices are
the PLC can be changed.
Switch function
The ON/OFF status of bit devices in the PLC are
controlled.
Control can be in the format of momentary, alternate or
set/reset.
Screen
changeover
The display screen can be changed over. The PLC or
touch key can be used to change over the display
screen.
Data batch
transfer
Data saved in the GOT can be transferred to the PLC.
Security
function
Screens are displayed only when the proper password is
entered. (This function is available also in the system
screens.)
5
HPP
MODE
Program (list)
*1
Programs can be read/written/monitored in instruction list
program format.
8
Parameter
*1
Parameters for the program capacity, memory latch
range, etc. can be read/written.
BFM monitor
*1
Buffer memories (BFM) in special blocks for the FX
2N
/
FX
2NC
Series can be monitored, and their set values
changed.
Device monitor
The ON/OFF status of bit devices as well as current
values and set values of word devices can be monitored
using device numbers and comment expression.
Current value/
set value
change
Current values and set values of word devices can be
changed using device Nos. and comment expression.
Graphic Operation Terminal GOT-F900