Specifications

Graphic Operation Terminal GOT-F900 Name of Display Unit 3
3-5
3) Port for PLC (RS-232C port) 9-pin D-Sub, male
- Used for RS-232C connection to a PLC or microcomputer board.
- Also used to connect two or more GOT units (RS-232C connection) or for
communication with a bar code reader or printer.
4) Port for PC (RS-232C port) 9-pin D-Sub, male
- For connection to PC when transferring screen data created by the screen creation
software.
- Not used for connection to a PLC.
- When the GOT is connected to a PLC through Port 3) (RS-232C), it can be used to
connect two or more GOT units (RS-232C connection) or for communication with a bar
code reader or printer.
- 2-port interface function can be used. (A PC on which the ladder support software has
been opened can be connected.)
- For details of connection with a PLC, microcomputer board, or personal computer, refer
to GOT-F900 SERIES HARDWARE MANUAL (CONNECTION) offered separately.