Specifications

Graphic Operation Terminal GOT-F900 Name of Display Unit 3
3-2
3) Ten-keys, cursor control keys, "SET" key, "DEV" key, "ESC" key and "ENT" key
- F920GOT-K and F930GOT-K
Ten-keys . . . . . . . . . . . "0" to "9", "
–
" and "
•
"
Used to enter a numeric value in the data input operation.
Cursor control keys. . . "
"
", "
#
", "
!
" and "
$
"
Used to move the cursor in the data input operation.
"SET" key . . . . . . . . . . Used to display the cursor in the data input operation.
"DEV" key . . . . . . . . . . Used to enter devices on DEVICE MONITOR screen (system
screen).
Also used in the F920GOT-K to change over the display from a
user screen to a system screen.
"ESC" key . . . . . . . . . . Used to cancel the data input operation.
(Also used to exit a system screen in the F920GOT-K.)
"ENT" key . . . . . . . . . . Used to determine an input numeric value in the data input
operation.
• The function keys in the F930GOT-K are used for switches, data inputs and screen
changeover on user screens.
The ten-keys, the cursor control keys, the "SET" key, the "ESC" key and the "ENT" key are
mainly used to change the data in "Numerical Input" and "Ascii Input". Set these keys using
the touch keys while a system screen is displayed. (Some keys are valid even while a
system screen is displayed. Refer to section 22.4.)