Specifications

Graphic Operation Terminal GOT-F900 Changeover of Display Screen (GT Designer) 21
21-8
21.5 Changeover to system screen
Function screens built in the GOT such as HPP MODE, SAMPLING MODE, ALARM MODE
and OTHER MODE can be displayed as user screens.
21.5.1 Display example of system screen
This section describes the method to display a system screen as a user screen (USER
SCREEN MODE) and the caution on this method.
• A system screen can be displayed by specifying a corresponding screen number shown in
the next page (Refer to 22.5). Prior to this, the following settings should be set so that the
previous user screen can be displayed after the system screen.
1) When a system screen is displayed as the base screen (from the PLC)
• When the sequence program shown below is
executed while screen No. n is displayed, screen No.
1001 (DEVICE MONITOR screen) is displayed.
- Word device to change over the base screen of the
GOT: D0
•Program in PLC
• To return to the previously displayed user screen from
a system screen, execute a program which specifies
the screen to be returned and press the END key
provided at the upper right corner of the system
screen. Then, the previous user screen is displayed
again.
• A sequence program to return to a user screen can be executed at any time while a system
screen is displayed.
2) When a system screen is displayed using a touch or function key
• Specify a desired screen number within the range of No. 1001 to No. 1030 in the same
way as specification of a user screen.
• When the END key (ESC key in the F920GOT-K) provided at the upper right corner of
the system screen is pressed, the previous user screen is automatically displayed again.
(That is, the setting to return to the previous screen is not required.)
Screen No. n
Screen No. 1001
[ DEVICE MONITOR screen ]
[ DEVICE MONITOR ] END
DEVI CE ON OFF
SET
COMMENT
DEC/HEX
User screen number to return + "END" ke
y
MOV K1001 D0
Chan
g
ed over to
screen No. 1001
MOV K
&&&
D0
Word device for chan
g
eover
Number of a screen to be displa
y
ed
next
(
user screen No.
)
.