Specifications

Graphic Operation Terminal GOT-F900 Creation of Display Screen (GT Designer) 20
20-41
20.10 Operation panel
When using the function keys in the F920GOT-K and the F930GOT-K, assign an operation to
each key by setting "Operation Panel" in "Common".
• The settings of the function keys are handled in the unit of project. (The function keys
cannot be set for each screen.)
• Key codes cannot be assigned to function keys.
• "Operation Panel" has the following functions:
• Two or more functions above can be set to one touch key. The priority of the function
execution is determined as follows:
Function Description
Reference
section/
paragraph
Bit function Turns ON or OFF the bit device when touched. 20.9.2
Word function Changes the value of the word device when touched. 20.9.3
Base switching function Switches the base screen when touched. 21
Description of function Quantity
Operation execution order when
two or more functions are set
Bit momentary 20
Bit set 20 Highest priority
Bit reset 20
Bit alternate 20
↓
Word set 20
Base screen switching 1 Lowest priority

50 maximum in all