Specifications

Graphic Operation Terminal GOT-F900 Creation of Display Screen (GT Designer) 20
20-38
#
##
#
Important point
1) Controlled bit device:
If "Operation" is set to "Momentary", the controlled bit device becomes OFF when the
display screen is changed over.
2) If two or more keys are pressed simultaneously:
If two or more switch functions are registered, and two keys are pressed, both functions will
be executed.
If three or more keys are pressed simultaneously, only the first two pressed will be effective.
3) If objects are assigned to one touch key:
If two or more switch functions are assigned or another object is assigned to one touch key,
the priority is given to a function/object registered first (while the screen is created).
4) If screens are overlaid:
If screens are overlaid using control devices or screen call function, the switch functions are
effective on all of the base screen and overlaying screens. If switches are overlaid, the
switch on the top screen is effective. Pay rigid attention so that switches are not overlaid.
In the switch areas A and B on the composed screen realized by overlay, each switch is
effective. However, if the area C is pressed, the switch B located on the top is effective.
5) Caution on connecting the SYSMAC C Series manufactured by OMRON
Using a forced set/reset by peripheral equipment in the SYSMAC C Series PLC locks the
PLC bit devices into their current state. This state cannot be changed by the PLC program.
In the above described situation, using the switch function in USER SCREEN MODE or
forced ON/OFF function in HPP MODE in the GOT will have the following consequences.
a
)
If a bit device is turned ON/OFF in the GOT, all the bit devices are released to chan
g
e state
b
y
the PLC pro
g
ram.
(
GOT uses the KC command
)
F930GOT or F933GOT: prior to Version 4.40; F940GOT or F943GOT: prior to Version 6.40;
F940WGOT: prior to Version 1.40
b
)
Onl
y
the device turned ON/OFF in the GOT is released to chan
g
e state b
y
the PLC
pro
g
ram.
(
GOT uses the FK command
)
F930GOT or F933GOT: Version 4.40 or later; F930GOT-K: First product,
F940GOT or F943GOT: Version 6.40 or later; F940WGOT: Version 1.40 or later
A
BB
A
Base screen Overla
y
in
g
screen Overla
y
in
g
screen
C
Example