Specifications

Graphic Operation Terminal GOT-F900 Introduction 1
1-18
GT Designer (Main items relating to F900 Series GOT)
SW
!
: Abbreviation of SW
!
D5C-GOTR-PACKE
(A), (B)... : Abbreviation of screen creation software package version name
The items shown above are main items relating to F900 Series GOT.
For further details about the version upgrade of each piece of software, refer to the
corresponding operation manual (operating manual).
GT Designer can be used to create screens for the F940GOT version 1.10 or later.
GT Designer version SW1D5C(A) or later can be used to create screens for all versions of
GOTs other than the F940GOT.
Version Description
SW0D5C(A) First version (not compatible with F900 Series GOT)
SW1D5C(E)
Usable for F940GOT
(Usable for F940GOT whose main unit version is V1.10 or later)
Addition of function, connecting to C Series manufactured by OMRON Corporation
Addition of function, connecting to microcomputer
SW1D5C(H)
Usable for F930GOT and F933GOT
Addition of function, connecting to bar code reader
Addition of function, connecting to SLC500 Series manufactured by Allen-Bradley
Co., Inc.
SW2D5C(A) Addition of hard-copy function
SW5D5C(F)
V5.05F
Compatible with connecting to MicroLogix 1000/1200/1500 Series manufactured
by Allen-Bradley Co., Inc.
Compatible with connecting to CS1 Series (CS1G/H-CPU
!!
-V1) manufactured
by OMRON Corporation
SW5D5C(K)
V5.09K
Compatible with connecting to MELSEC positioning units FX-10/ 20GM, FX
2N
-10/
20GM and E-20GM
Compatible with connecting to FREQROL A500, E500 and S500 Series
Compatible with connecting to FP Series manufactured by Matsushita Electric Works
Compatible with high-definition font display
Compatible with "6
×
8 dots" font display
SW5D5C(P)
V5.13P
Addition of PLC applicable to GOT
Q00JCPU, Q00CPU and Q01CPU
Q multi-CPU system (Q02CPU, Q02HCPU, Q06HCPU, Q12HCPU and
Q25HCPU)
S7-200 Series manufactured by Siemens AG
Addition of function, vertical display capability in F930GOT
SW5D5C
V5.26C
Compatible with F920GOT-K and F930GOT-K