Specifications

Graphic Operation Terminal GOT-F900 Creation of Display Screen (GT Designer) 20
20-24
• Combination of touch keys (Excluding F920GOT-K)
If a touch key on the alarm list is assigned with a key code from the table below, it will
perform its respective operation, also shown in the table.
Key codes used for the alarm list display function
When a touch key to which "FFB8" (detailed information display function) is assigned, the
alarm message (comment window) or the base screen is changed over, and the detailed
information is displayed.
To display the detailed information, "Detail Display Destination" in "Alarm List Display
Setting" of the screen creation software should be preliminarily set to "Comment Window"
or "Base Screen".
• When "Comment Window" is selected
• Move the cursor to an alarm message to be displayed
in detail, and press the DETAIL key. Then, the detailed
display window opens as shown on the left.
• A comment in the comment list specified by "Detail
Display No." in "Alarm List Display Setting"
–
"Detail
Display Setting" of the screen creation software is
displayed.
• Changeover of the base screen
A screen specified by "Detail Display No." in "Alarm List Display Setting"
–
"Option" of the
screen creation software is displayed.
Key code Operation
FFB0 Displays the cursor.
FFB1 Deletes the cursor.
FFB2 Moves the cursor upward.
FFB3 Moves the cursor downward.
DETAI LS
When this button is pressed, the
detailed displa
y
window is closed.