Specifications

Graphic Operation Terminal GOT-F900 Creation of Display Screen (GT Designer) 20
20-22
• Combination of touch keys (Excluding F920GOT-K)
If touch key is placed on an alarm history screen and assigned a key code from the table
below, it will perform its respective operation, also shown in the table.
Key codes used for the alarm history display function
When a touch key to which "FFB8" (detailed information display function) is assigned, the
alarm message (comment window) or the base screen is changed over, and the detailed
information is displayed.
To display the detailed information, "Detail Display Destination" in "Alarm History Common
Setting" of the screen creation software should be preliminarily set to "Comment Window"
or "Base Screen".
• When "Comment Window" is selected
• Move the cursor to an alarm message to be displayed
in detail, and press the DETAIL key. Then, the detailed
display window opens as shown on the left.
• A comment in the comment list specified by "Detail
Display No." in "Alarm History Common Setting"
–
"Device Monitor"
–
"Edit" of the screen creation
software is displayed.
Key code Operation
FFB0 Displays the cursor.
FFB1 Deletes the cursor.
FFB2 Moves the cursor upward.
FFB3 Moves the cursor downward.
FFB6 Deletes the selected content of alarm.
FFB7 Deletes the content of all alarms.
FFB8
Displays the detailed information of the alarm
selected by the cursor.
DETAI LS
When this button is pressed, the
detailed displa
y
window is closed.